Metrological certification

Topseller

Screw-in thermocouples

With terminal head form B Basic type: 901020

Screw-in thermocouples are primarily used for measuring temperatures in liquids and gases. Their installation type enables the formation of reliable seals, both for vacuum and overpressure applications.

Temp.: -200 to +800 °C
Insertion length 160 to 600 mm
Thermocouples type J, K, and L

Screw-in thermocouples

With compensating cable Basic type: 901050

Screw-in thermocouples are primarily used for measuring temperatures in liquids and gases. Depending on the version, the compensating cables are suitable for dry or humid rooms that have a temperature range from -20 to +350 °C.

Temp.: -200 to +600 °C
Stainless steel 1.4571
Thermocouples type K and L

Mineral-insulated thermocouples

According to DIN 43710 and DIN EN 60584 with bare connection wires Basic type: 901210

Mineral-insulated thermocouples are made of a flexible, thin-walled sheath cable in which the thermocouple wires are embedded in compressed fire-resistant magnesium oxide. The good thermal transfer between the sheath and the thermocouple enables short response times and high measuring accuracy.

Temp.: -200 to +1200 °C
Thermocouples type J, K, L, N
Response time: t0.5 from 0.15 s

Push-in thermocouples

With terminal head form B Basic type: 901120

Push-in thermocouples are predominantly used for measuring temperatures in liquid and gaseous media. Thermowells made of various ceramic materials and heat-resistant steels protect the measuring insert against chemical influences and mechanical damage.

Temp.: -200 to +1200 °C
Insertion length 100 to 960 mm
Thermocouples type B, J, K, L, and S

Screw-in thermocouples

With terminal head form J Basic type: 901030

Screw-in thermocouples are primarily used for measuring temperatures in liquids and gases. Their installation type enables the formation of reliable seals, both for vacuum and overpressure applications.

Temp.: -200 to +800 °C
Insertion length 50 to 300 mm
Thermocouples type J, K, and L

Push-in thermocouples

With form A terminal head Basic type: 901110

Push-in thermocouples are predominantly used for measuring temperatures in liquid and gaseous media. Thermowells made of various ceramic materials and heat-resistant steels protect the measuring insert against chemical influences and mechanical damage.

Temp.: -200 to +1600 °C
Protection tube diameter 15 or 22 mm
Thermocouples type B, J, K, L, and S

Metrological certification

We are at your service