Head Version

Topseller

Screw-in RTD temperature probe

With terminal head form B Basic type: 902020

Screw-in RTD temperature probes are predominantly used for measuring temperatures in liquids and gases. The installation type enables the formation of reliable seals for both vacuum and overpressure applications.

Temp.: -50 to +600 °C
Terminal heads BUZ/BUZH/BBK
Temperature sensor Pt100/Pt500/Pt1000

Topseller

Screw-in RTD temperature probe

With terminal head form J Basic type: 902030

Screw-in RTD temperature probes are predominantly used for measuring temperatures in liquids and gases. The installation type enables the formation of reliable seals for both vacuum and overpressure applications.

Temp.: -50 to +400 °C
Reliable seal in the event of vacuum and overpressure
Temperature sensor Pt100

JUMO MarineTemp

Screw-in RTD temperature probe for marine applications Basic type: 902850

The screw-in RTD temperature probe is the preferred choice for measuring temperatures in liquid and gaseous media in the shipping industry. A decisive criterion is the reliable sealing feature when vacuum and overpressure occurs. This is how it is certified according to Bureau Veritas.

Temperature: -50 to +400 °C
Pt100 or Pt1000 temperature sensor
Maritime type approval Bureau Veritas

Multipoint temperature probe

For temperature measurement in grain silos Basic type: 903530

The multipoint temperature probe reliably measures the temperature at different heights of a silo. The RTD temperature probe can be used for concrete and metal silos. Depending on the version, the multipoint temperature probe can be mounted outside or inside.

Measuring range: -5 to +80 °C
Analog or digital temperature sensor
ATEX approval zone 20 (dust)

Mineral-insulated RTD temperature probe

With terminal head form B according to DIN EN 60751 Basic type: 902220

Mineral-insulated RTD temperature probes are used in chemical plants, power plants, pipelines, and in engine manufacturing due to their flexibility and easy mounting.

Temp.: -50 (-200) to +600 °C
Pt100 temperature sensor
Response time: t0.5 from 0.7 s

JUMO HEATtemp

Screw-in RTD temperature probe for heat meters with terminal head for direct mounting (type DL) Basic type: 902427

These type DL heat and cold meter RTD temperature probes are used for temperature measurement in closed pipeline systems. Direct mounting without an additional immersion sleeve is recommended to achieve optimum thermal coupling to the measurement medium in the heating system.

Temp.: 0 to 180 °C
Temperature sensor: Pt100, Pt500, Pt1000
Insertion length 85 to 280 mm

JUMO HEATtemp

Push-in RTD temperature probes for heat meters with terminal head for immersion sleeves (type PL) Basic type: 902437

Heat meter RTD temperature probes are used for temperature measurement in closed pipeline systems. Due to the installation in immersion sleeves with fitting tolerance, the system no longer needs to be emptied during regular replacement once the certification period has elapsed.

Temp.: 0 to 180 °C
Temperature sensor: Pt100, Pt500, Pt1000
Insertion length 85 to 400 mm

JUMO HEATtemp

Screw-in RTD temperature probe for combined cold/heat meters with terminal head for direct mounting (type DL) Basic type: 902454

Combined cold/heat meter RTD temperature probes are used for temperature measurement in closed pipeline systems. Direct mounting without an additional thermowell is recommended to achieve optimum thermal coupling to the measurement medium in the heating system.

Temp.: 0 to 120 °C (cold) / 180 °C (heat)
Temperature sensor: Pt100, Pt500, Pt1000
Insertion length 85 to 280 mm

JUMO HEATtemp

Push-in RTD temperature probes for combined cold and heat meters with terminal head for thermowells (type PL) Basic type: 902464

Combined cold and heat meter RTD temperature probes are used for measuring the temperature in closed pipeline systems. Due to the installation in thermowells with fitting tolerance, the system no longer needs to be emptied during regular replacement once the certification period has elapsed.

Temp.: 0 to 120 °C (cold) / 180 °C (heat)
Temperature sensor: Pt100, Pt500, Pt1000
Insertion length: 85 to 400 mm

JUMO Etemp B

Push-in RTD temperature probe with terminal head (form B) for standard applications Basic type: 902123

Push-in RTD temperature probes are predominantly used for temperature measurement in liquid and gases. Application areas include air conditioning and refrigeration technology, heating and apparatus engineering, and process technology.

Temp.: -50 to +400 °C
Terminal head B or BUZ
Sensor: Pt100, Pt500, or Pt1000

Push-in RTD temperature probe

With terminal head form J Basic type: 902130

Push-in RTD temperature probes are predominantly used for temperature measurement in liquid and gases. The application areas are, among others, in air-conditioning and refrigeration technology as well heating, furnace, and apparatus engineering.

Temp.: -50 to +400 °C
Protection tube, continuous or stepped down
Pt100 temperature sensor

RTD temperature probes

for indoors, walls, and outside Basic type: 902520

Indoor, wall, and outdoor RTD temperature probes for air conditioning technology are mainly used to measure temperature in rooms, halls, and outdoors. Various device versions made of plastic with different protection types are available for the respective measuring task.

Temp.: -50 to +90 °C
Protection type IP20 to IP65
Sensor: Pt100, Pt1000, or Ni1000

JUMO Wtrans T

RTD temperature probe with wireless data transmission Basic type: 902930

The thermometer acquires temperatures in the operating range from -30 to +260 °C or -200 to +600 °C. This measured value is transferred wirelessly to the receiver of the Wtrans measuring system. This makes it ideal for mobile or stationary temperature measurement without any wiring work.

Temp.: -200 to +600 °C
Pt1000 temperature sensor
Insertion length: 30 to 10000 mm

JUMO VIBROtemp

Screw-in RTD temperature probe with plug connector Basic type: 902040

The screw-in RTD temperature probes of the VIBROtemp series are reliable –even under pressure– at measuring the correct temperature in commercial vehicles, construction machinery, agricultural machinery, motors, compressors, and in many areas from the railway technology field. Use in hydrogen applications is possible. Different plug connections are available to suit the specific application area.

Pt100 temperature sensor
Protection type: IP67/IP69
Temp.: -50 to +270 °C

Screw-in RTD temperature probe

With plug connector according to DIN EN 175301 Basic type: 902044

Vibration-resistant screw-in RTD temperature probes allow temperatures to be measured under pressure in engines and compressors as well as in plant engineering and shipbuilding.

Pt100 temperature sensor
Temp.: -50 to +260 °C
Two-wire or four-wire circuit

RTD temperature probe

For the food and pharmaceutical industry Basic type: 902810

The RTD temperature probes can be built with terminal heads made of either stainless steel, aluminum die-cast, or plastic. Various process connections are available for the different requirements of sub-areas in the food and pharmaceutical industry.

Stainless steel terminal head
Temp.: -50 to +250 °C
Insertion length 25 to 400 mm

Mineral-insulated RTD temperature probe

With terminal head form J according to DIN EN 60751 Basic type: 902230

Mineral-insulated RTD temperature probes are used in chemical plants, power plants, pipelines, and in engine manufacturing due to their flexibility and easy mounting.

Temp.: -50 (-200) to +600 °C
Pt100 temperature sensor
Response time: t0.5 from 0.7 s

RTD temperature probe

For devices and plants tested according to DIN EN 14597 Basic type: 902006

This type of RTD temperature probe may be used in connection with temperature control and limitation devices tested according to DIN EN 14597 (DIN 3440) in heat transmission systems according to DIN 4754.

Two-wire as standard
Temperatures up to 700 °C
Pt100 temperature sensor

JUMO PROCESStemp

RTD temperature probes for process technology with Ex approval Basic type: 902820

RTD temperature probes for process technology are predominantly used for temperature measurement in liquids and gases. They consist of a protection fitting according to DIN 43772 with various process connections, a terminal head, and an interchangeable measuring insert.

Temp.: -200 to +600 °C
Available with an Ex transmitter
Interchangeable measuring insert

Push-in RTD temperature probe

With terminal head form B Basic type: 902120

Push-in RTD temperature probes are predominantly used for temperature measurement in liquid and gases. Application areas include air conditioning and refrigeration technology, process technology as well as heating, furnace, and apparatus engineering.

Temp.: -50 to +600 °C
Sensor: Pt100, Pt500, or Pt1000
Two-wire, three-wire, or four-wire

Head Version

We are at your service